-
-
PROCESSESOur products range from induction melting furnaces ranging from 50kg to 15,000KG capacity, and our induction power suppliers range from 80KW to 12,000KW to meet all melting needs.
-
ADVANTAGEHTGP provides a systematic solution for scrap aluminum melting and casting.
-
EVENTS & NEWS
Aluminum smelting plant for sale
Release time:
May 26,2025
source:
There have been a few practical regulations and government decrees in place for more than a hundred years. For example, the British Factory Acts of 1833 required guarding around dangerous machinery. In the early 20th century, in order to gradually rationalize the legislation, a Factories and Workshops Act (1901) was passed, which paved the way for the Electrical Regulations in 1908. The purpose of these laws was to avoid dangers in industrial electricity use. In 1944, this special regulation was extended to a wider range of operations and incorporated into the Factory Act of 1961. Finally, the current Health and Safety at Work Act (HSW) was enacted in 1974 Aluminum smelting plant for sale.
These are statutory provisions for use in specific situations, and it is necessary for all those who are engaged in electrical heating processes (such as induction heating processes) to be familiar with these laws.
Aluminum smelting
Section 6 of the Health and Safety at Work Act 1974 is called "General Duties of Manufacturers". According to the terms and content of this part regarding work use, all people who use the power circuit of the product now have certain obligations (including those who use the equipment at work). When using the products as specified, it must be ensured that these products are always safe and Health and safety requirements for such products should be met before they reach the place of use. On the other hand, anyone who uses products in their work that are related to power supply must ensure that they are safe when used correctly. Sections 2, 7, and 8 set out the responsibilities of users and employees. The four main parts of Section 6 can be summarized as follows: 1) The product must be correctly designed, manufactured, assembled and installed. 2) Necessary tests must be carried out. 3) There must be sufficient information on correct use. 4) Necessary research must be carried out on the above when appropriate. Section 6 has many details detailing the various links of the power supply circuit.
Requirements, for example, must be reasonably practical in design and manufacture. In this way, when the product is used correctly, it can be guaranteed to be safe and harmless to health. The responsibility of inspecting unqualified products is to enable people working in various links to take certain preventive measures. If a new design is required, an important step is to study how to ensure that any danger caused by the design is discovered. Then try to reduce and eliminate this danger. When using advanced technology, such as using high-power thyristor inverters or high-frequency generators, you must be careful because there is often heat loss (or high voltage) caused by strong current in these places. Excessive heat can Can cause insulation damage and expose conductor surfaces. As a result, dangerous voltage ranges or arcing voltages may occur.
Section 2 covers the responsibilities of the user after the product is installed and put into use. One of the most important steps is to appoint a safety officer, as described in the following.
HM inspectors provide powerful tools. This section authorizes inspectors to use prohibition notices to prevent any equipment from being used if the inspector is convinced that the equipment may pose a serious risk of injury to the operator.
Section 7 is a requirement for employees, that is, employees are required to operate in accordance with the responsibilities of the employer. The employer can require employees to operate in accordance with the law.
We use optional cookies to improve your experience on our site, including through social media connections, and to serve personalized ads based on your online activity. If you refuse optional cookies, we will only use cookies that are necessary to provide you with the service. Privacy Statement
Leave your inquiry now, and get a systematic solution later.
We will contact you within one working day. Please pay attention to your email.
For any product inquiries, technical support, or service requests, contact us below:
WeChat/Whatsapp : 86-17538889778
Tel : 86-379-65188091
Address: No. H3, North Jingjin Road, Dongda Science and Technology Park, Luoxin Industrial Cluster, Luoyang, Henan, China