HTGP HTGP aluminum melting furnace

info@gyrhl.com

LANGUAGE ▼

English

العربية

Induction heating is a type of heating

Release time:

Jan 20,2025

source:

Induction heating

According to the output frequency of the equipment, it is divided into three categories: audio signal transmission frequency range is 20Hz-20KHz signal,


super audio frequency series frequency 30--80KHZ series, power 7~160KW
intermediate frequency series frequency 1K--20KHZ 3~160KW
ultra high frequency series frequency 100KHZ—1.1MHZ series power 3~100KW


Product introduction:
high frequency TXCG series: frequency 100KHZ~1.1MHZ, power 3~100KW
super audio frequency TX series: frequency 30~100KHZ, power 7~160KW
intermediate frequency TXZ series: frequency 1~20KHZ, power 15~160KW
handheld series: frequency 30-100KHZ, power 10KW, 30KW, 60KW, induction coil lead wire 3--8 meters long;


Main applications:
High frequency and audio equipment are mainly used for: heat treatment of metal parts, quenching of parts, annealing of stainless steel, annealing of copper tubes, hot rolling, etc.; welding of turning tools, milling cutters, drill bits, welding of carbide saw circular saw blades, welding of diamond saw blades, welding of copper tubes, welding of cable joints, welding of communication products; smelting of precious metals, gold, platinum, stainless steel and a small amount of other alloys.

Medium frequency induction heating equipment

 

Main uses: smelting of the above various metals, heat penetration of bars, heat matching, welding, etc.;

Handheld equipment: used for online welding of copper plates and copper wire joints of power transformers; online brazing of copper tubes of air conditioners and refrigerators;

 

Induction heating equipment selection guide about workpiece heat penetration. Application range: hot upsetting and hot rolling of fasteners, standard parts, auto parts, hardware tools, rigging, twist drills, etc.

 

Principle: The larger the diameter of the workpiece, the lower the frequency should be. (Select the appropriate power according to production efficiency. The greater the power, the faster the speed). Such as: medium frequency above 20 (1-20KHZ)
5-20, high frequency (20-100KHZ)
Ultra-high frequency below 5 (100-500KHZ)
About heat treatment. Application range: shafts, gears, sprockets, machine tool guide rail accessories, metal wire annealing, hydraulic accessories, auto parts, knives, shears, stainless steel pot annealing, etc.


Principle: The shallower the hardened layer of the workpiece, the higher the frequency should be. (Combined with the shape of the workpiece, quenching method, quenching hardness, hardened layer requirements and materials, etc.) Such as:
Below 1mm, ultra-high frequency 100-700KHZ
1-2.5mm, supersonic frequency 20-100KHZ
Above 2.5mm, medium frequency 1-20KHZ
Brazing. Application range: brazing bits, turning tools, reamers, milling cutters, drill bits, etc. and composite welding of different materials on the bottom of stainless steel pots.


Principle: The larger the welding volume, the lower the frequency should be. (Depending on the specific workpiece shape, material, solder, etc.)
For tools with a volume less than 30*30*30, high frequency can be used;
Smelting. Application range: precious metals such as gold, silver, copper, lead, etc. (Depending on the specific melting furnace and production efficiency). High frequency can be selected for small capacity, and medium frequency can be selected for large capacity

Previous：

Furnace temperature

Next：

Conveyor machine

Previous

Furnace temperature

Next

Conveyor machine

Related News

We use optional cookies to improve your experience on our site, including through social media connections, and to serve personalized ads based on your online activity. If you refuse optional cookies, we will only use cookies that are necessary to provide you with the service.  Privacy Statement

Leave your inquiry now, and get a systematic solution later.

We will contact you within one working day. Please pay attention to your email.

Submit message